Adverse Conditions: Common Conditions That Increase Accident Risk

Safe driving is a driver’s responsibility, but you can’t control everything. There are several adverse conditions, that is, factors that can impair the actual performance of the driver, increasing the possibility of an accident. It is important to remember that adversities do not always appear in isolation. Often what causes an accident is a combination of factors making the danger even greater.

Below are the six most common adverse conditions that significantly increase the risk of accidents but most importantly look out for speed bumps like speed bumps Los Angeles for example.

1 – Lighting

Refers to street lighting conditions. The problems can be natural (sun) and artificial (poles and lighthouses) light. Both too much and too little light can be dangerous. If too much light causes glare, the lack of it causes vision difficulties.

2 – Weather

The phenomena of nature make it very difficult for us to see and make the pavement smooth, harming the correct use of the vehicle. Rain, wind, hail, snow, fog, smoke, fire, cold, and even excessive heat greatly diminish our ability to drive the vehicle. In addition to the difficulty of seeing and being seen, adverse weather conditions cause problems on roads, such as mud, sand, and landslides, making them smoother and more dangerous, causing skids and accidents.

3 Ways

A series of variables define the road’s drivability: state of conservation, width, presence or absence of shoulder, and several vehicles, among others. Many conditions can vary on the road: slope, type, paving conditions, width, unevenness, holes, works, etc.

4 – Traffic

Here we refer to the presence of other elements (pedestrians, vehicles, animals, etc.) on the road and on certain occasions that interfere with the number of vehicles, pedestrians, and drivers of non-motor vehicles circulating on the roads.

5 – Condition Of The Vehicle

It is a significant factor to consider to avoid accidents. The vehicle’s condition is closely linked to the safety of passengers and cargo. The driver must keep the vehicle in transit condition and respond to all necessary commands, as it is not possible to drive safely using a defective vehicle. These are just a few examples of problems, such as worn tires, burnt-out light bulbs, suspension defects, and unregulated brakes.

6 – Driver

There are several situations involving the physical and mental state of the driver. It is up to each driver to know how to evaluate their actual conditions when proposing to drive a vehicle. Many physical and mental conditions can harm the driver, the most common being: fatigue (tiredness), drunkenness, sleep, poor vision, worry, insecurity, etc.